WEN 6502 4 x 36-Inch Belt and 6-Inch Disc Sander with Cast Iron Base
Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you’ll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations.
With all of this in addition to the 6-inch side disc, you’ll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. This package also includes an 80-grit sanding disc, an 80-grit sanding belt, a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.
Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
Belt tilts anywhere from 0 to 90 degrees
Sturdy cast iron base prevents any heavy vibrations
4.3 Amp motor provides up to 3600 RPM
Tension release lever provides for simple changes to sandpaper grit